Skip to content
Free US domestic shipping when you spend $150+
Free US domestic shipping when you spend $150+

Luxury Precision P6 Pro Ti99 Limited Edition PocketHiFi Flagship Audio Player

Sold out
Original price $ 4,799.00 - Original price $ 4,799.00
Original price
$ 4,799.00
$ 4,799.00 - $ 4,799.00
Current price $ 4,799.00

Luxury Precision P6 Pro Ti99 Limited Edition

Two years after the P6PRO was launched, its "ultimate flagship" has finally appeared. Introducing the P6PRO Ti99, which combines the essence of L&P's high-end DAP technology. Only 99 units will be released worldwide, priced at 4799 dollars.

Luxury Precision P6 Pro Ti99 Limited Edition - MusicTeck

Why only 99 units?

As the first discrete R2R DAP — the ultimate version of the P6 series, the technical challenge of the Ti99 is how to "further improve" based on the PRO version. Note that the dynamics of the P6PRO are equal to having two P6s running in parallel.  In the end, after a lot of precise selection and matching, only the ±0.01% ultra-precision resistors were selected. As a result, the overall dynamics of the Ti99 increased by 2dB compared to the PRO version. Due to the difficulty of selecting and matching resistors with such precision, only 99 units were produced.

Luxury Precision P6 Pro Ti99 Limited Edition - MusicTeck

Now, it's even more powerful and better suited for IEMs

As the most powerful model in the P series, the Ti99 not only put a lot of effort into its 202 resistors but also made many changes and upgrades in the analog amplification circuits. For instance, the op-amp was upgraded to the same model as the LP6Ti 7th anniversary edition; the inclusion of the LP6 Platinum firmware "adds a touch of finesse" to the listening experience, especially suitable for ACG music. The "limited-edition sound tuning" returns once again.

Luxury Precision P6 Pro Ti99 Limited Edition - MusicTeck

Bring back the classic 7th-anniversary casing craftsmanship?

In terms of casing craftsmanship, the P6PRO Ti99, also limited to 99 units, uses the same techniques as the LP6Ti 7th anniversary edition. This includes a light-weighted and sturdy grade-five titanium frame, a colorful titanium color printing process, a traditional Japanese Echizen lacquered rosewood back panel, and a leather case handcrafted from Italian veg-tanned waxed leather. It's useful, delicate, textured, and fun to play with.

Luxury Precision P6 Pro Ti99 Limited Edition - MusicTeck

The next-gen pocket-sized device for audiophiles?

While achieving better performance and sound tuning, the size of the P6PRO Ti99 remains the same as the original P6PRO, and its weight is still less than 300 grams. It offers powerful sound quality for on-the-go use.

Luxury Precision P6 Pro Ti99 Limited Edition- MusicTeck


Basic Specs
Model P6Pro Ti99
Dimensions/Weight 124x67.3x20mm/294g
Screen 3.5 inch, IPS Screen, 480x320ppi
Body Material 5th Grade Titanium 
Back Panel Echizen Painted Mahogany
Motherboard 1812C
DAC Fully Discrete R2R DAC
Crystal Oscillator Ultra-Low Noise -160db Crystal Oscillator
OP-Amplifier Superior O
Headphone Amplifier EXCELS EP-AS
Inductor Low resistance high current alloy inductor
Buttons ALPS
Storage 64GB 24 BIT ECC FLASH
Support Expansion Storage 1TB micro SD Card (TF)
Charger Specs 4.8-5.5v, 2A
Battery  4000mA/H lithium battery
Battery Life Approximately 15hrs
Accessories  USB Cable, Cloth Bag, Screen Protector, User Manual, Warranty Card, Italian Leather Case
Highest Sample Rate PCM: 24bit 384KHz DSD: DSD256 11.2896 MHz
Supported File Format APE, AAC, ALAC, FLAC, WAV, MP3, WMA, DFF, DSF, AIFF, SACD-ISO
Output 3.5mm Single-End (PO, LO, SPDIF), 4.4mm(PO, LO), USB-C(Storage, USB DAC)

 

Technical Specs

Adptive Headphone Impedance 8-300ohm
Pre-EQ 6 Music Genres
HP Gain 2 Tiers
Dop SPDIF Support
Digital Audio Filter 6 Filters (Including NOS)
Output Phrase 0/180
USB Connection Mode MSC/Audio
USB DAC Support
USB Delay Settings Long-Delay/Short-Delay
DSD Decoding Settings Native DSD/DSD to PCM(Through D2P DAC)

 

3.5mm Single-End Output Specs

SNR >125.5db
Dynamic Range >123db
THD <0.003% @32ohm
Freq Range 20Hz-20KH +/- 0.8db
Output Impedance 0.2ohm
Channel Seperation >75db @32ohm
Output Vrms High Gain: 2.45Vrms, Low Gain: 1.55Vrms
Maximum Output @16ohm 330mW
Maximum Output @32ohm 180mW
Maximum Output @300ohm 20mW

 

4.4mm Balanced Output Specs

SNR >126db
Dynamic Range >123.5db
THD <0.003% @32ohm
Freq Range 20Hz-20KH +/- 0.8db
Output Impedance 0.4ohm
Channel Seperation >113db @32ohm
Output Vrms High Gain: 4.9Vrms, Low Gain: 3.1Vrms
Maximum Output @32ohm 700mW
Maximum Output @64ohm 330mW
Maximum Output @100ohm 240mW
Maximum Output @300ohm 80mW

 

Bluetooth Specs

Bluetooth Version 5
Supported Codec LDAC, APTX, APTXHD, APTXLL, AAC, SBC
Direction P6Pro Ti99 as Receiver
Distance 15m
Bluetooth Clock FPGA Precision Clock

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
Pierre M.
The Sound of LP

A futuristic yet retro object:
the titanium in its case, with its faded hues that evolve over time, reminds me of Enki Bilal's atmosphere.
The sound :
indeed, it opens up over the course of hours (currently over 100) to unfold that LP sound that is so satisfying ; for me, "it colors itself in harmonious, luminous hues" is exactly what it feels like.
Practicality:
lightweight, small size, long-lasting battery, efficient Bluetooth, simple handling.

All in all, it's a delight to use as a close companion!

d
dan
tiny monster with amazing dynamics

A big enhancement over original p6 pro. This device doesn't sound as small as its size but you get every detail there is on the audio files you served with such a juicy, transparent realism and dynamics. Best sounding 'mini' portable device I have ever encountered...

R
Ryan

Great