Everything You Need to Enjoy High Fidelity Music!
Cart 0
Luxury Precision P6 - MusicTeck

Luxury Precision P6 Lossless Bluetooth HiFi Audiophile Portable Music Player with Free Leather Case

$ 2,999.00

Luxury & Precision P6 64GB PCM1704K R2R DAC Lossless Bluetooth HiFi Audiophile Portable Music Player DAP

Description

The original

The whole machine is equivalent to the use of 2 PCM1704K chips ideal dynamic, SNR 118dB.

The modified

The whole machine is equivalent to the use of 4 PCM1704K chips ideal dynamic, SNR 120dB. Increase circuit area, accommodate more resistors and components, improve hearing and dynamics.

All new

The whole machine is equivalent to 8 PCM1704K chips ideal dynamic, SNR 123dB, Bluetooth audio with protocol stack, more FPGA LUT. Improved listening and dynamics, improved operability and ease of use, increased and optimized Bluetooth audio.

Full resistance network, discrete R2R DAC

Innovative 24 Bit full resistance network discrete R2R DAC portable player.

One over ten thousand

Hundreds of one-millionth of a resistor carefully selected to form a discrete R2R DAC network.

R2R the beautiful sound can also burst

The whole machine is equivalent to using 8 PCM1704K chips in parallel for ideal dynamics, and R2R the beautiful sound can also burst.

0 background noise

The SNR of the whole machine is higher than 123dB, 0 background noise, and good news to low resistance balanced armature earphones.

Simple non-touch operating system

Less interference, less power consumption, leaving more power for artificial circuits.

Optimize Bluetooth with protocol stack

A normal Bluetooth clock is a clock that is recovered after parsing data received wireless. The Bluetooth clock of P6 is directly generated by the stop-moment crystal vibration of P6 processed by FPGA, and then the parsed audio data is aligned to the accurate clock generated by FPGA and sent to DAC for lower jitter.

Volume control system

Self-developed lossless - electronic switch matrix volume control system, lower signal loss, easier to use.

The original sound reproduction

Full resistance PCM,DSD native decoding, original sound reproduction.

Architecture advantages, sound characteristics

Because of the advantages of the R2R architecture and the flexibility of the discrete components, the sound of the P6 can be particularly fresh and natural, delicate and mellow.

Sound is the whole pursuit of P6

Although the thrust is great, it is particularly friendly to the earphones. In particular, it enhances the control of the balanced armature earphones while meeting the demand of high output current, and it also needs to achieve a natural stretch of hearing.

Specification

Model: P6

Dimensions/weight: 124x67.3x20mm/248g

Display 3.5-inch, IPS screen, resolution 480x320

Body material: aviation aluminum

Rear cover: glass

Main control: 1812C

DAC: Fully discrete R2R decoding

Crystal oscillator: Low phase noise -160dB active crystal oscillator

Op amp: EXCELS V-O

Amp: EXCELS EP-A

Inductance: low internal resistance large current metal alloy inductance

Button: ALPS

Capacity: 64GB 24 Bit ECC FLASH

Support extended capacity: 512GB micro SD card (TF)

Use charger specifications: DC voltage input range 4.8-5.5V, power adapter to large output current is recommended to use an adapter of 2A or more (compatible with fast charger)

Battery capacity/type: 4000mA/H Lithium battery

Life time: 15 hours (in case of single-end output of non-high bit rate files played at normal volume when the screen is off)

Accessories: data cable, velvet bag, protective film, manual, warranty card

Highest sampling rate support: PCM: 24Bit 384KHz, DSD: 11.2896MHz (DSD256)

Support audio format: APE, AAC, ALAC, FLAC, WAV, MP3, WMA, DFF, DSF, AIFF, SACD-ISO

Audio interface: 3.5mm single-ended headphone interface (switchable LO, PO, SPDIF), 4.4mm balanced headphones interface (switchable LO, PO), USB-TYPE C interface (switchable data mode/USB/DAC mode)

Setting parameters

Adapted headphone impedance: 8 -300ohm

EQ adjustment: 6 style adjustments

HP output: 2-level gain adjustment

Dop SPDIF: support

Digital filter settings: 6 filter modes (including NOS)

Output phase setting: 0 degrees/180 degrees

USB connection mode: MSC mode/Audio mode

USB DAC: support

USB Audio delay setting: long delay mode/short delay mode

DSD decoding settings: native DSD mode / DSD to PCM mode (for adaptation to decoders that only support D2P)
3.5mm single-ended line output performance parameters

SNR: >123dB (single-ended)

Dynamic range: >118dB (single-ended)

Distortion + noise: <0.003%

Frequency response: 20Hz-20KHz ± 0.8dB

Channel separation:> 98dB 10K load

Single-ended line output level: 2.45Vrms/1.55Vrms/ switchable design
4.4mm balanced line output performance parameters

SNR: >123.5dB (balanced)

Dynamic range: >118.5dB (balanced)

Distortion plus noise: <0.003%

Frequency response: 20Hz- 20KHz ± 0.8dB

Channel separation: > 115dB 10K load

Single-ended line output level: 4.9Vrms/3.1Vrms/ switchable design

P6 earphone output part of performance parameters (3.5mm single-ended output)

Maximum output power: @ 16ohm 330mW (distortion rate <0.0039% of on-load power)

Maximum output power: @32ohm 180mW (distortion rate <0.003% of on-load power)

Maximum output power: @300ohm 20mW (distortion rate <0.003% of on-load power)

SNR:> 123dB

Dynamic range: >118dB

Distortion + noise: <0.003% @32ohm load

Frequency response: 20Hz -20kHz ± 0.8dB

Output impedance: 0.2 ohm

Channel separation:> 75dB @32ohm load

Output voltage (to high volume): high gain 2.45Vrms, low gain 1.55Vrms
P6 earphone output part of performance parameters (4.4mm balanced output)

Maximum output power: @32ohm 700mW (distortion rate <0.003% of on-load power)

Maximum output power: @100ohm 240mW (distortion rate <0.003% of on-load power)

Maximum output power: @300ohm 80mW (Distortion rate <0.003% of on-load power)

SNR: > 123.5dB

Dynamic range: >118.5dB (balanced PO)

Distortion + noise: <0.003%@32ohm

Frequency response: 20Hz-20KHz ± 0.8dB

Output impedance: 0.4ohm

Channel separation:> 113dB 32ohm load

Output voltage: high gain 4.9Vrms, low gain 3.1Vrms

Bluetooth technical specifications

Bluetooth version: 5.0

Supported protocols: LDAC, APTX, APTXHD, APTXLL, AAC, SBC

Transmission direction: Bluetooth of P6 is the receiving end

Transmission distance: within 15 meters of unobstructed open space

Bluetooth audio clock source: the clock generated by the FPGA is used as the clock source

Luxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeckLuxury Precision P6 - MusicTeck

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
d
d.
Awesome little player

Share this Product


More from this collection